The Pit Board
  News Index
 
Editorial • Mail 

Sportbike Links 
  Teams, Riders,
  Clubs, Manufacturers

Fast Dates News   SBK Superbike Girls
Iron & Lace News   Sexy Centerfold Models
Berm Busters News   Our Girls Play Dirty

Meet the Models
  FastDates.com Models


Fast Dates Store

Sportbike Books
FastDates Apparel
Motorcycle Games
Collectors Calendars
Bikes & Babes Movies
Supermodel Books
Supermodel Music

Harley Books
Motocross Books
Garage Tools
Computers, Electrics


T.A.T.U.
200 KpH in the
Wrong Lane!

Russianl lesbian 17 year old schoolgirls expalin paristroika


Aprilia RSV Mille R
SPECIFICATIONS

Price Estimated: $12,000
Engine type:
V60 Magnesium: four-stroke longitudinal 60° V-twin; liquid cooling with three-way pressurized circuit; double overhead camshaft operated by a mixed gear/chain system; four valves per cylinder; patent AVDC (Anti Vibration Double Countershaft).
Fuel:
95 RON unleaded petrol
Bore and stroke:
97 x 67.5 mm
Displacement:
997.62 cc
Compression ratio:
11.8 : 1
Maximum power at crank:
138.72 hp (102 kW) at 9,500 rpm
Maximum torque at crank :
10.9 kgm (107 Nm) at 7,500 rpm
Fuel system:
Integrated electronic engine management system. Indirect multipoint electronic injection. Throttle body diameter: 57 mm.
10,3 litre airbox, with Air Runner air scoop.
Ignition:
Digital electronic ignition, with one spark plug per cylinder and integrated injection
Starter:
Electric
Exhaust:
Double silencer with three-way catalytic converter and Lambda sensor (Euro 2)
Alternator:
12V - 500 W
Lubrication:
Dry sump with separate oil tank.
Double trochoidal pump with oil cooling radiator.
Steel oil tank

Gearbox :
Six speed with ratios:
1st 34/15 (2.27)
2nd 31/19 (1.63)
3rd 26/20 (1.3)
4th 24/22 (1.091)
5th 24/25 (0.96)
6th 23/26 (0.88)
Clutch:
Multiple disc wet clutch with patented PPC power-assisted hydraulic control
Braided metal clutch line
Radial pump with 15 mm piston.
Primary drive:
Straight cut gears with ratio: 60/31 (1.935)
Final drive:
Chain
Ratio: 40/16 (2.5)

Frame:
Box section sloping twin-spar aluminium alloy frame.
Front suspension:
Showa 43 mm diameter upside-down fork, with adjustable compression, rebound and preload. Wheel travel: 120 mm.
Rear suspension:
Aluminium alloy double banana swing arm; APS progressive system linkage.
Sachs hydraulic shock-absorber with adjustable rebound, compression, preload and length. Wheel travel: 133 mm.

Brakes:
Front: Brembo double 320 mm diameter floating stainless steel disc. Brembo "Triple bridge" callipers with four 34 mm diameter pistons and 4 sintered pads.
Braided metal brake line.
Rear:
Brembo 220 mm diameter stainless steel disc. Two-piston (32 mm diameter) calliper and sintered pads. Braided metal brake line.
Wheels :
Aluminium alloy
Front: 3.50 X 17" Rear: 6.00 X 17"
Tyres:
Tubeless radial;
front: 120/70 ZR 17
rear: 190/50 ZR 17 (alternative: 180/55 ZR 17)

Dimensions:
Overall length: 2035 mm
Overall width: 730 mm (at handlebars)
Overall height: 1145 mm (at windscreen)
Saddle height: 810 mm
Handlebar height 830 mm (at bar ends)
Wheelbase 1,415 mm
Trail 101.7 mm
Steering angle 24.80°
Dry weight:
189 Kg
Tank:
18 litre capacity (including 4 litre reserve)

Colours available:
Lead Grey / Magnet Grey, Aprilia Black / Diablo Black, and Fluo Red / Lead Grey
All colour combinations come with a polished frame.

© Copyright FastDates.com
All images and information on this website are copywrited and owned by FastDates.com / Gianatsis Design and may not be used without permission. Pit Lane News uses authorized press news services with permission. Editorial contributions welcome, FastDates.com Advertising & Calendar sponsorship inquiresHERE

Exclusive First USA Track Test!

"An incredible new Superbike from Aprilia bordering on perfection."
World Superbike girl Janelle Perzina evaluates the new
2004 Aprilia RSV1000R & Factory

Friday August 28th, '03 - I was excited to accept Aprilia USA’s invitation for FastDates.com to attend the American press launch at a track day for the new 2nd generation Aprilia RSV1000R. It's the hottest new sportbike on the planet, and the first of an all new lineup of new 1000cc Superbikes for the 2004 season from all the major manufacturers. Actually, the first superbike for this new generation was Ducati’s highly acclaimed 999 which was introduced almost a year ago and is well on its way to clinching this year’s 2003 World Superbike title in the hands of Neil Hodgsen.

A comparison between the Italian V-Twin champ from Bologna and this new Aprilia V-Twin from Noale was just a natural. And since we already own an example of acknowledged superbike class leader, a well set up and modified Ducati 999S tucked away in my garage, the new Aprilia RSVR would have a tough comparison to measure up against. I was looking forward to track testing the new bike.

Janelle Screensaver HERE • More Jannelle HERE

When Aprilia's Public relations Manager Robert Pandya told us the press introduction was to take place at some unheard of track in the middle of the Nevada desert simmering in the 115F degree summer heat of August I actually considered not going. But knowing FastDates.com would once again be beating all the American streetbike magazines to the punch with a first ever ride test, and the fact Aprilia was bringing both the new RSVR base and upgraded Factory models to ride, together with the current 2003 model Aprila Mille R and Tuono was the swing vote to convince me (together with a kick in the butt from publisher Jim Gianatsis) to make the trip from Los Angeles to Las Vegas.

We spent the night at the Luxor hotel, then at 6am the next morning we’d be up and on our way to the spme unknown roadrace track at Pahrump, NV, some 45 miles east of Vegas, so we could get an early start while the day was still cool around 90 degree(!). Our BMW M3 made the 45 mile drive to the track in about 25 minutes as we topped 165 miles an hour in some sections of the open desert. Gotta love Nevada for open back roads!

The day before I had made the 284.43 mile trip (Thanks MapQuest.com!) from our San Fernando Valley digs in about 3 hours, usually cruising the Bimmer at 110-120mph on the I-15 to Vegas unless dickheads in their big SUVs would jam up the fast lane. That evening after checking into the Luxor, we hiked down the street to the MGM Grand to watch our favorite caberate show called LaFemme, an affiliate of the world famous Crazy Horse saloon in Paris. Picture 12 of the most beautiful girls in the world all with perfectly match bodies, ballet and modern danced trained, performing nearly nude perfectly coreographed skits to music and light. It is the most incredibly beautiful and erotic stage show in the world and one worth seeing again and again every time i return to Paris or Vegas. The girls who perform in the Shows actually rotate every few months between Paris and Las Vegas and it is the premier show in the world for the world’s prettiest, most skilled dancers.

The 1 hour and 20 minute Show at la Femme got me hot and horney and wanting more to finish off the evening. It was a choice between going back to the hotel and phoning an escort service from the hundreds listed in the Vegas phone book. Instead I grabbed a cab and headed over to Cheetahs which is one of the hottest strip clubs in Vegas. As soon as I walk in the door I was accosted by 2 beautiful girls who dragged me into the back to stick their tounges in my ears and any other crevice they could find. The climax to the evening came with a hot blond Russian girl named Olga who made me all her own for the rest of the night. Girls just wanna have fun! The next thing I knew the alarm was ringing in my hotel room the next morning at 6am and I was off to the race track.

Viva la Femme

The track at Pahrump is the home of the Bragg-Smith Advanced Driving School which uses factory O46 Corvettes to train wannabe sportscar roadracers how to turn left and right, brake and shift. It’s really tight and twisty like a big gocart track, but more than long enough at about 1.25 miles in length with lots of elevation changes, nice 270 degree sweeping corners, tricky 90 degree corners, and just a pure blast to ride on a bike. Speeds are relatively slow at 2nd -4th gear from 30-120 mph.

The first bike I took out to learn the track was an Aprilia Tuono, which is based on the current
2003 model RSV Mille sans the fairing, and with tall motocross style bars in place of clip-ons. Pahrump was definetly a Tuono track with its tight chicanes, sweepers and switch back corners and I spent 30 minutes backing the Tuono sideways into the corners and jumping over the apex curbing and wheeling out of corners as I learned the course and dialed-in my lines. The Tuono is definetly the most fun bike to ride in the world. Period. Even more fun than a week on Temptation Island.


Above: The base model RSVR with Showa front forks and a Sachs rear resevoir shock handled perfectly on the racetack with full confidence.

Returning to the pits for a brief cool down, I then made the switch to the all new 2004 RSV100R base model bike. You immediately notice this is the first of the new generation 1000cc Superbikes that is really downsized and feels just like a smaller Japanese 600cc Sportbike, and a 406 pounds dry is nearly as lightweight. Everything on the bike fits perfectly to my 5’8” frame and as I accelerated into the turn one sweeper I felt immediately at home. The R did everything perfectly: braking, shifting and accelerating, and drifting it though corners. Right away I didn’t have to think about what the bike was doing and i could concentrate on running at higher speeds, adjusting my lines as needed to pick up my lap times from the previous learning session.

I haven’t felt this comfortable on a new bike since the first time I rode a Ducati 916 which went on to prove itself as the benchmark bike of the 90’s. The Aprilia does everything perfect. The base suspension comprised of fully adjustable Showa 43mm upside-down forks with adjustable compression, rebound and preload were perfect right out of the box with the stock factory settings. Out back, there’s an aluminum alloy double banana swing arm with APS progressive system linkage hooked up to a Sachs hydraulic shock-absorber with adjustable rebound, compression, preload and length.

The suspension and handling proved to befaultless. I could place the bike anywhere on the track that I wanted, or flick it side to side with ease while fully laid over and dragging my boot toe, giving myself more spare change to concentrate on braking and acceleration traction. I've never ridden a bike that felt this neutral and well balanced, able to tighten up my cornering line whenever I needed at the front end, or by dialing-in more throttle at the rear. The base R model is shod with Michelin 120/70 Front and 190/55 ZR 17 Pilot Sports which are my favorite rubber. The Factory model gets Pirelli Dragons of the same size.

Dry weight on the new '04 R/F models is actually some 15 pouinds heavier at 185 / 189 F kilos, 407 / 416 lbs.than the outgoing the old '03 model Mille/R at178/183 kilos, 392/403 lbs. Which is really suprising as the new '04 bikes are so much physically smaller and feel so much ligher when riding them. I'd blame most of the weight increase on changing to the new dual silencer exhaust system which now helps to make more power, from the old model's lighter single exhaust silencer system. It's no big deal as it's still 20-30 lbs lighter than a Ducati 999.

Braking was also pretty incredible on the base R which comes equipped up front with Brembo double 320 mm diameter floating stainless steel disc spinning between Brembo "Triple Bridge" calipers with four 34 mm diameter pistons and 4 sintered pads all controlled through braided metal brake line. The bike would instantly haul down from the 120 mph straights into the turns with the back wheel in the pawing the air if needed, with just easy 1-2 finger pressure, corner after corner. Luckily the race spec Michelins were up to the task of biting hard into the asphalt.

The Aprilia R’s engine performance is in a different league of its own. The new 1000R engine is rated at 138.72 hp (102 kW) at 9,500 rpm, a big jump up from the 112 hp of the previous model. The power band is very smooth, broad and tractable like a V-Twin should be from 4,000 rpm right up to 10,500 where I was bouncing it off the shift light. It likes to be revved. But strangely enough , it doesn’t feel like like a Ducati Testastretta V-twin where there the engine vibration excites and I revel in every power pulse, short shifting and the massive mid range torque rush pulls my arms from their sockets. Instead, the Aprilia R engine with its counterbalance shafts has the smooth flowing power rush of a Japanese inline multi 4-cylinder, but without their flat bottom and peaky top end rush. The Aprilia offers a broader, more user friendly V-Twin powerband. It’s the best of both worlds if you aren’t addicted to one or the other.

Power wise, the new Aprilia will certainly beat the base 123 hp Ducati 999, but it doesn't pull as strong as the 999S rated at 136hp, or my own 999S with the Ducati Performance Race Exhaust Kit. The optional Aprilia Race Silencer Kit with its 12 hp mid-range increase would be a welcome addition to the new RSVR, particularly with all the money you'll be saving in comparison up front on the purchase price.

After my first 30-minute track session on the base R ‘04 model which emerged as flawless, I came back to the pits and grabbed a now old ‘03 model Mille R for comparison. Immediately on board you notice that it is a bigger, heavier and bulkier bike, and out on the race track that initial impression carries over into its track performance. The previous generation Mille, once the leading Superbike contender, now feels like a truck. It takes incredibly more effort to change direction and to place it on a line -it just is not as nimble and quick, and it has noticeably less power to get it to move its big ass. More than one moto journalist came back with the same response, “It feels like a truck.” Yesterday’s cutting edge sportbike is a definite victim to its new generation brother. If you own the current model Mille there is no way you will be happy with it one you ride the new model. The only way to save it from a fate worse than death is to get the high handlebar parts necessary to turn it into a Tuono.

I purposely left the best for last to have a better feel for what had evolved in the Mille line. My next 30 minute track session was devoted to the new R Factory model which upgrades the base model R with the hi-zoot Öhlins titanium nitride coated 43 mm diameter upside-down forks also featuring external hydraulic adjustment system for rebound, compression and preload. Along with those sexy lower legs for radial caliper mounted Brembo calipers with four 34 mm diameter pistons and 4 sintered pads clinching double Ø 320 mm floating stainless steel discs. And out back the great working sachs resevioir shock is replaced by a multi adjustable as well, up market Ohlins.

Other changes on the Factory model from base R include forged and slightly lighter, as opposed to cast, aluminum anodized wheels, the newest Pirelli Dragon Supercosa tires, and a few carbon fibre tidbits. Dry weight is listed at 185 kilos / 407 lbs. The Factory's overall weight savings over the base R is just about 10 lbs, most of it important reciprocating weight in the wheels which offers an important performance gain in handling, braking and acceleration.

Once riding the R Factory bike out on the track, though, the spec differences became almost negligible. I actually found myself liking the base model R a little better, probably because it came set up better out of the box (or perhaps the way our Aprilia technicians had set up the F compared to the R for our test). The radial brakes on the F model didn’t seem any better than the already incredible Brembo stoppers on the base R, which seemed to have better feel.

 

Go to Aprilia RSV1000R Test Page 2

Back to Aprilia RSV1000R Introduction Page 1
Aprilia RSV1000R Nera and Racing Specials Page 3


click to see much more ...


FastDates.com test riders and Covergirls Janelle, Chandi and Joanna Krupa get down to work
in the 2004 Garage Girls calendar available right here.

If you missed your chance to say "Hi!" to Chandi and Janelle at Laguna Seca WSB or the LA Calendar Motorcycle Show, don't worry. You can meet each girl in the new 2004 FastDates.com Calendars.

RSV1000R FACTORY
MODEL UPGRADES
The RSV 1000 R Factory is an enhanced RSV 1000 R with special ultralight materials and higher spec Ohlins suspension components bring the RSV 1000 R Factory up to track-riding excellence. The most important parts which mark the difference between the RSV 1000 R Factory and the RSV 1000 R are:

SUSPENSION
The 43 mm upside-down Öhlins Racing fork is titanium nitride coated to optimize smoothness. Its special structure with elongated sleeves and shortened legs reduces the load on two critical points of the forks themselves (the sliding bush and stanchion-leg coupling). The wheel travel is 120 mm. Like the racing models, the fork rebound, compression and preload may be precision adjusted. The forged aluminium brake calliper mounting bracket allows the new radial callipers to be fitted, perfectly in line with the latest GP and world SBK trends. The rear Öhlins Racing shock absorber originates directly from experience on the track. It is fitted with a separate piggy back nitrogen cylinder built into the body. It has adjustable rebound, compression, preload and length in order to lift and lower the rear axle and adjust the suspension to different riding styles and different race tracks. Among the optional components is a continuous tyre pressure measuring system, to keep the alignment under complete control according to the settings and suspension.

FACTORY BRAKING SYSTEM
The best sportbike deserves the best braking system, and the RSV 1000 R Factory is once more on the leading edge of technology, with a radial clamp front braking system developed by Aprilia together with Brembo. The benefits for the rider are:
More effective braking: More precise response to the driver's actions. Any free lever movement due to calliper ”elasticity” is almost completely eliminated since radial mounting prevents any movement of the calliper itself.
·Longer pad life. With radial mounting, the pads work more in line with the disc, precisely because the calliper is kept more strictly aligned with its theoretical working position even when under extreme stress. This lengthens pad life basically because better alignment leads to more even surface wear.
·Better system stability and consequently less difference between hot and cold performance.The 320 mm front floating steel discs use lowered mounts to minimize weight and inertia, leading to more effective handling.The radial system on the RSV 1000 R Factory is combined with a radial pump to form the most sophisticated braking system currently fitted to a production bike.

The rear braking system is a Brembo Gold Series with 220 mm diameter stainless steel disc and a two-piston (32 mm diameter) calliper. Both the front and rear systems use braided metal lines taken from the aeronautics industry, which eliminate the irritating pressure smoothing effect of conventional lines and ensure maximum braking precision.

COMPONENTS
An exclusive two-chamber steering damper from the specialist Öhlins Racing line is fitted as standard. It may of course be adjusted to adapt the bike's response to various riding conditions. The extensive use of carbon components make the motorbike even lighter and more refined. The mudguards and several parts of the fairing are made of extremely light “woven carbon composite”.Furthermore the RSV 1000 R Factory headstock shaft is made of aluminium and not steel, which also contributes to reducing the overall weight of the bike.

The exclusively designed forged wheels deserve a particular mention, since they are definitely one of the most distinctive parts of the bike, not just aesthetically, but also technically. They are forged from Anticorodal 6061 aluminium using an 8,000 ton hydraulic press. This technique produces wheels without defects or the porosity which may always result from the casting process, and gives them exceptional mechanical characteristics. Finite-element analysis was used to find the best design, which came out to be a front wheel with six spokes and back wheel with five which split in two towards the rim. This was not just an aesthetic choice; this structure provides excellent lateral and torsional rigidity (thus keeping the suspension stable).

As with the whole RSV 1000 R project, performance becomes beauty in this case too. The weight saving is exceptional: about 25% less for each wheel compared with the lightest wheels on the market made using the traditional aluminium casting technique. Inertia too is consequently 25 % lower than for cast aluminium alloy wheels. The maniacal care taken over the RSV 1000 R Factory project has not overlooked even the most insignificant details. The wheels are anodized and not painted. This leads to a further weight saving on this essential component and ensures they keep their characteristic colour for the whole life of the bike. Furthermore the technical wheel data is not embossed, but carved into the wheel itself, consequently removing more material and further weight. Aprilia has also homologated a 5.5 inch rear wheel (6 inches are standard). The smaller section central rim channel gives additional support on bends, better handling, and better bike response, especially on the track.


Aprilia RSV Mille R FACTORY
SPECIFICATIONS

Price Estimated: $18,000
Engine type:
V60 Magnesium: four-stroke longitudinal 60° V-twin; liquid cooling with three-way pressurized circuit; double overhead camshaft operated by a mixed gear/chain system; four valves per cylinder; patent AVDC (Anti Vibration Double Countershaft
Fuel:
95 RON unleaded petrol
Bore and stroke:
97 x 67.5 mm
Displacement :
997.62 cc
Compression ratio:
11.8 : 1
Maximum power at crank :
138.72 hp (102 kW) at 9500 rpm
Maximum torque at crank :
10.9 kgm (107 Nm) at 7,500 rpm
Fuel system:
Integrated electronic engine management system. Indirect multipoint electronic injection. Throttle body diameter: 57 mm.
10,3 litre airbox, with Air Runner air scoop.
Ignition:
Digital electronic ignition, with one spark plug per cylinder and integrated injection
Starter:
Electric
Exhaust:
Double silencer with three-way catalytic converter and lambda sensor (Euro 2)
Alternator:
12V - 500 W
Lubrication:
Dry sump with separate oil tank.
Double trochoidal pump with oil cooling radiator.
Steel oil tank

Gearbox :
six speed with ratios:
1st 34/15 (2.27)
2nd 31/19 (1.63)
3rd 26/20 (1.3)
4th 24/22 (1.091)
5th 24/25 (0.96)
6th 23/26 (0.88)
Clutch:
Multiple disc wet clutch with patented PPC power-assisted hydraulic control
Braided metal clutch line
Radial pump with 15 mm piston.
Primary drive:
Straight cut gears with ratio: 60/31 (1.935)
Final drive:
Chain
Ratio:
40/16 (2.5)

Frame:
Box section sloping twin-spar aluminium alloy frame
Two-chamber adjustable Öhlins Racing steering damper with one-piece mounting.

Front suspension:
Öhlins titanium nitride coated 43 mm diameter upside-down fork; 120 mm wheel travel.
External hydraulic adjustment system for rebound, compression and preload.
Lowered legs for radial calliper mounting

Rear suspension:
Double banana aluminium alloy swing arm and APS progressive system linkage.
Öhlins Racing hydraulic shock absorber with piggy-back cylinder and adjustable rebound, compression and preload. 133 mm wheel travel.

Brakes:
Front: Brembo double Ø 320 mm floating stainless steel disc. Radial calliper with four 34 mm diameter pistons and 4 sintered pads. Braided metal brake line.
Rear: Brembo 220 mm diameter stainless steel disc. Two-piston (32 mm diameter) calliper and sintered pads. Braided metal brake line.
Wheels:
Forged aluminium alloy
Front: 3.50 X 17"
Rear: 6.00 X 17"
Tyres:
Tubeless radial;
front: 120/70 ZR 17
rear: 180/55 ZR 17 (alternative: 190/50 ZR 17)

Dimensions::
Overall length: 2035 mm
Overall width: 730 mm (at handlebars)
Overall height: 1145 mm (at windscreen)
Saddle height: 810 mm
Handlebar height 830 mm (at bar ends)
Wheelbase 1418 mm
Trail 101.7 mm
Steering angle 24.80°
Dry weight : 185 Kg
Tank: 18 litre capacity (including 4 litre reserve)

Colours available:
Lead Grey/Magnet Grey, Aprilia Black/Diablo Black and Fluo Red/Lead Grey
.